Quality

Wooden rods

Wood is a natural material. We always pay attention to the selection of our woods. However, it can happen that the grain runs differently than desired in some places and that there are isolated knots. Natural wood can darken or yellow. This is a normal process of natural woods.

Clamp connector

Fused Filament Fabrication (FFF), commonly known as 3D printing, is used as the manufacturing technology for the MOKIT clamp connector. Meltable plastic is applied in layers. The layer thickness lies between 0.1 and 0.3 mm, depending on the application. Thus, the surface shows clear grooves and small holes in some places. These do not impair the functionality of the connector and do not represent a defect.