←

Table frame

W 115 × H 70 × D 60 cm

(The ideal measurements for the table top are 160 x 80 cm.)

You need:

  1. 12 ×  Connector (perpendicular)
  2. 1 ×  Connector (angle)
  3. 2 ×  Wooden rod L 120 cm
  4. 4 ×  Wooden rod L 70 cm
  5. 4 ×  Wooden rod L 56 cm
  6. 1 ×  Wrench
  7. 1 ×  Measuring tape

First read about the proper usage and watch the video:

How-to Video

1

Place two clamps on each of the 70 cm long rods (do not tighten the hex nuts yet).

2

Place each of the two 56 cm long rods into the clamp then tighten all hex nuts.

3

Place a clamp A on the upper rod 20 cm from the right clamp and another clamp A at the lower 20 cm from the left clamp . Don't tighten the hex nuts yet.

4

Mirror the process for the other side.

5

Place a clamp A and C in the middle of each of the 120 cm long rods . The rods are at an angle of approx. 45 degrees . Don't tighten the hex nuts completely yet.

6

Connect both sides with the cross and tighten all the hex nuts.

7

make sure all the hex nuts are fastend tight. Finished.